Shinetek Equipments

Facebook Twitter Tumblr


Tips For Maintaining BOD Incubators

Posted by Admin on July, 22, 2014

BOD Incubators are incubators which are used for maintaining a temperature of 20 ° Celsius which is required to perform a test called Biochemical Oxygen Demand. This test is widely used in fields such as medicine, research laboratories and agriculture. These incubators are also used in precision studies such as plant and insect studies, bacterial culturing and germination studies. To get accurate results from the test, it is important to maintain these machines. Discussed below are some general guidelines to maintain BOD Incubators:


  • If the incubator is not in use for an extended period of time, it is suggested to disconnect the power cord from the power socket.
  • Make sure that you give the incubator proper servicing in short intervals through reputed servicing companies.
  • Pay attention to the information sheet of the BOD incubator, it has all the warnings which need to be studied. Make sure that you do not overuse the incubator.

Cleaning BOD Incubators

BOD Incubators require regular cleaning so as to ensure their proper functioning. Listed below are some tips for cleaning BOD Incubators:


  • Disconnect the power cord from the wall socket before you begin to clean the incubator or else it may cause electric shock or fire.
  • Use a neutral detergent to clean the unit. Make sure you do not use any organic solution or strong chemicals which can damage the unit.
  • Never use water, thinner or alcohol for cleaning the unit. This can damage and discolor the unit.

When cleaning the inner chambers of these incubators, it is important to remove the shelves which are installed in the chamber. After removing the shelves, check for contaminated portions and clean them with a soft cloth. After cleaning, reassemble the shelves properly.


To sum up, it is very essential to clean and maintain BOD incubators in order to ensure their long and smooth working life. Reputed BOD Incubator Manufacturers offer maintenance services to their valuable clients.


Next Post >>

This entry was posted on July, 22, 2014 at 16 : 09 pm and is filed under BOD Incubators. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response from your own site.


Comments [1]

Admin

Arpit

December, 28, 2016 at 15 : 40 pm

Your blog of how to use bod incubator is very helpful for us and get hightech bod incubator for preparing chemicals by best bod incubator suppliers for laboratories and research works.

Leave a Comment

(required)
(required) (will not be published)